The pros of the product

Plam Rock allows you to make artificial rocks in a short time. Moulded by hand or with special rubber moulds, the scenographic elements can be perfected with a personal artistic touch using the Isoplam tool kit.

Thanks to the optimal characteristics of water repellency and resistance to atmospheric agents and shocks, artificial rocks and other decorative elements made with Plam Rock are not afraid of water and last a long time, ideal for pool edges.

Application

1. Preparation of the polystyrene substrate with Plam Net galvanised mesh fixed using dedicated plastic fixing nails.
2. Application of the first skim coat of Plam Rock artificial rock mortar, followed by a second coat of Plam Rock in a thickness of 20–100 mm.
3. Imprinting using Isoplam stamps and rollers pre-treated with Plam Liquid Rele liquid release agent, followed by detailing and finishing of Plam Rock using the dedicated Isoplam Tool Kit.
4. Colouring of Plam Rock using Plam Wax or Plam Paint.
5. Application of the selected protective coating: Plam Sealing/O or Plam Pool.

The pros of the product

The moulded plaster is extremely versatile and can be applied on practically any type of surface, such as concrete, masonry, brick, stone, plasterboard, polystyrene and even wood, subject to the preparation of the bottom and the use of a specific primer to make the printed plaster adhere better.

The stone effect plaster can also be made indoors and outdoors. Thanks to the use of protectors, the surface becomes water-repellent, anti-mould and resistant to atmospheric agents. In addition to the walls moulded with this technique it is also possible to create columns, fireplaces, arches, decorative elements and furnishing accessories.

Application

1. Preparation of the bonding primer Deco Primer Base.
2. Application of Plam Stone mortar in a thickness of 10–20 mm.
3. Imprinting of Plam Stone using Isoplam stamps and rollers treated with Plam Liquid Rele liquid release agent, followed by detailing and finishing with the Isoplam tool kit.
4. Colouring of Plam Stone using Plam Wax or Plam Paint.
5. Application of the selected protective finish: Plam Sealing, Plamacryl, or clear Plam Wax.

The pros of the product

Using the corten, zinc or copper effect instead of traditional metal sheets, considerable savings are achieved on material and installation costs. Application times are fast and inconveniences such as the unsightly leaks that often characterise Corten steel exposed to atmospheric agents are avoided. The surfaces maintain the aesthetics of oxidised metals with greater practicality, being ideal for facades, interiors and furnishings.

With Oxydecor it is also possible to create rusty, galvanised or copper effects even on non-metallic materials such as wood, plastic or plaster. The versatility, the lightness of the coating and the ease of application allow you to create original and personalised decorative solutions, enhancing each project with an elegant and contemporary character.

Application Oxydecor Rust

1. Existing substrate.
2. Application of Deco Primer Finish.
3. Application of Oxyrust Primer.
4. Application of two coats of Oxyrust Paint using a trowel.
5. When the coating is almost dry, application of Oxyrust Oxidant by spray, pad or sponge in an irregular pattern.
6. While the surface is still damp, uniform application of Oxyrust Activator by spray over the entire surface.
7. Application of Oxyrust Protection or Plam Pol Water Mono Matt by roller, brush or airless spray.

Application Oxydecor Zinc

1. Existing substrate.
2. Application of Deco Primer Finish by roller.
3. Application of two coats of Oxyzinc Liquid + Oxyzinc Powder by roller.
4. When the coating is almost dry, application of Oxyzinc Oxidant and Oxyzinc Activator by spray, pad or sponge in an irregular pattern.
5. Application of Oxyzinc Protection or Plam Pol Water Mono Matt by roller, brush or airless spray.

Application Oxydecor Copper

1. Existing substrate.
2. Application of Deco Primer Finish.
3. Application of Oxyzinc Liquid + Oxyzinc Powder by roller.
4. Application of Oxyrust Paint by brush in an irregular pattern.
5. When the coating is almost dry, application of Oxyrust Oxidant by spray, pad or sponge, followed by Oxyrust Activator.
6. Application of Oxyrust Protection or Plam Pol Water Mono Matt by roller, brush or airless spray.

Application Oxydecor Verderame

1. Application of Deco Primer Finish by roller.
2. Once dry, application of coloured Oxygreen Primer by roller.
3. Once dry, uniform application of two coats of Oxygreen Powder + Liquid.
4. Before the coating has completely dried, application of Oxygreen Oxidant and Oxygreen Activator in an irregular pattern using an Isoplam spray pump.
5. Once fully dry, application of Oxygreen Protection by roller or airless spray, or application of another suitable protective coating.

Application Oxydecor Verderame Antico

1. Application of Deco Primer Finish by roller onto the existing substrate.
2. Application of coloured Oxygreen Primer by roller.
3. Application of Oxygreen Powder mixed with Oxygreen Liquid using a plastic or steel trowel in an irregular mottled pattern.
4. Application of Oxygreen Oxidant and Oxygreen Activator in an irregular manner.
5. Application of Oxyrust Paint in an irregular manner using a plastic or steel trowel.
6. Application of Oxyrust Oxidant in an irregular manner, followed by Oxyrust Activator over the entire surface.
7. Application of the protective coating Oxygreen Protection or Plam Pol Water Mono by roller or airless spray.

Application Oxydecor Verderame Brunito

1. Application of Deco Primer Finish by roller onto the existing substrate.
2. Application of one coat of Oxyrust Primer by roller.
3. Application of one coat of Oxyrust Paint using a mottled technique.
4. Application of one coat of Oxyrust Oxidant sprayed using a mottled technique.
5. Application of one coat of Oxyrust Activator by spray.
6. Application of one coat of Oxygreen Powder mixed with Oxygreen Liquid using a mottled technique.
7. Application of one coat of Oxygreen Oxidant and Oxygreen Activator sprayed using a mottled technique.
8. Application of Oxygreen Protection by roller or spray.

The pros of the product

Plamina is an easy-to-apply and high-performance product, designed to enhance both new surfaces and elements to be restored. Thanks to its innovative formulation, it offers an anti-mould action that increases its durability, ensuring healthier and more resistant environments.

The metal effects, available in material or glossy variants, allow you to cover a wide range of supports: plasters, whitewashed walls with synthetic or mineral paints, plasterboard, concrete, wood, fibre cement, metal and PVC.

This versatility makes Plamina the ideal choice for architects, interior designers and applicators looking for a coating capable of combining aesthetics, functionality and durability.

Application

1. Existing substrate clean, sound and well bonded.
2. Application of Deco Primer Finish by roller or brush.
3. Application of coloured PLAMINA.
4. Grinding and polishing of the surface.
5. Application of the final protective coating Plamina Lux.