Product pros

Microverlay microcement is a low-thickness architectural coating, making it the ideal solution for renovating existing spaces without the need to remove or demolish existing surfaces.

Its excellent adhesion allows it to be applied to a wide range of substrates, including plasterboard, ceramic tiles, marble, mosaic, porcelain tiles, sand-cement screeds, concrete, wood and self-levelling compounds.

Resistant to medium foot traffic and waterproof, Isoplam’s resin cement is suitable for floors and walls in both interior and exterior residential and commercial environments, including living areas, kitchens, bathrooms, bedrooms, shops, showrooms, restaurants, pubs and hotels. It is also ideal for stairs, walk-in showers, worktops, kitchen countertops, furniture and bespoke interior elements.

The absence of grout lines and joints creates a seamless, hygienic surface that is exceptionally easy to clean. Microverlay is compatible with underfloor and wall heating systems. Being water-based, it emits no substances harmful to people or the environment.

Application

FLOOR:

1. Surface grinding of concrete, screed, self-levelling compound or tiled surfaces.
2. Application of Vapor Barrier with fibreglass mesh.
3. Application of Microverlay Base or Medium, followed by intermediate sanding and cleaning.
4. Application of Microverlay Finish, followed by intermediate sanding and cleaning.
5. Once fully cured, application of the appropriate final protective sealer.

WALL:

1. Cleaning of the plaster substrate.
2. Application of Deco Primer Finish.
3. Application of Microverlay Medium, followed by sanding and cleaning.
4. Application of Microverlay Finish, followed by sanding and cleaning.
5. Once fully cured, application of the appropriate final protective sealer.

The pros of the product

Beautiful to look at, Deco Nuvolato is also easy to clean and requires very little maintenance. It therefore lends itself to being laid not only in residential contexts but also as a floor for offices or floor for shops, warehouses, storage areas, production areas, shopping and logistics centres, exhibition centres, exhibition halls and in all public environments.

The cloudy floor, driveable and resistant even to high traffic, is fortified with the addition of special sealants and protectors that densify and harden the concrete: in this way, the flooring becomes extremely resistant to atmospheric agents, water-repellent, scratch-resistant, stain-resistant, anti-oil and dustproof. By choosing the “combed” type finish, it is also possible to create waterproof and non-slip exterior floors.

Application

1. Formwork installation and placement of polyethylene sheeting, non-woven fabric, spacers and welded steel mesh.
2. Placement of fibre-reinforced, admixture-modified concrete.
3. Application and power trowelling of Isoplam® Deco Nuvolato.
4. Once fully cured, application of the appropriate final protective sealer.

The pros of the product

Plam Renova Isoplam is a solvent-based and pigmented acrylic colouring additive, available in 7 different colours and 3 intensity gradations. Ideal for covering surfaces in Isoplam moulded concrete, it allows you to renew and customise decorative floors with ease, guaranteeing uniform results and of great aesthetic impact.

Thanks to its resistant and easy-to-apply formula, Plam Renova improves wear resistance caused by freeze and thaw cycles and can also be applied by spraying. The final appearance of the flooring varies according to the starting colour, allowing infinite customisation possibilities.

Application

1. Dry, clean and sound substrate.
2. Apply Plam Renova using a medium-pile roller or an airless spray system.
3. Apply one coat of Plam Sealing/L to seal and protect the colour finish.

The pros of the product

Available in different finishes, Terrazzoverlay XL lends itself to multiple applications: smooth and polished for representative interiors, or brushed non-slip for exteriors and high-scale areas.

This versatility makes it ideal for homes, showrooms, offices, shopping centres, executive spaces, sports and recreational centres, residential complexes, accommodation and catering facilities, spas, museums and historical-cultural sites.

Resistant to heavy traffic and low maintenance, it guarantees continuous, hygienic and easy-to-clean surfaces, free of leaks or joints.

Application

1. Grinding of the concrete, screed, or tiled surface.
2. Application of Skyprimer, fully broadcast with quartz sand to refusal.
3. Application of Terrazzoverlay XL using a screed bar and spiked roller.
4. Grinding, grouting, and polishing.
5. Application of the final protective sealer.

The pros of the product

The reduced thickness allows Skysense to cover existing floors without invasive demolition or removal, thus guaranteeing significant time and cost savings. The installation is quick and versatile: the coating is easily applied to supports such as ceramics, tiles, marble, cement, sand-cement or self-levelling screeds, transforming dated and worn surfaces into continuous floors with a contemporary and refined design.

Thanks to its high adhesion and resistance to impact, abrasion and chemical agents, Skysense is the ideal solution for any indoor environment, including those with underfloor heating. The absence of leaks facilitates daily cleaning, while the water-based formulation is safe for health and environmentally friendly, in line with the most current safety and well-being regulations.

Application

1. Grinding of the concrete, screed, self-leveling compound, or tiled surface.
2. Application of Skyprimer, broadcast with quartz sand.
3. Application of Skysense using a steel trowel or squeegee.
4. Application of a second coat of Skysense, finished with a power trowel fitted with a PVC disc and white plastic blades, followed by sanding and cleaning.
5. After full curing, application of the appropriate final protective sealer.

The pros of the product

The low thickness and excellent adhesion and resistance to high traffic, chemical agents, abrasion and cracking, allow Skyconcrete® Indoor to cover even existing surfaces, renewing environments in an extremely practical and fast way, without the need to remove or demolish them – with a clear saving of time and money.

Skyconcrete® Indoor can be applied with excellent results on ceramics, tiles, marble, cement, sand-cement screed, self-levelling. The absence of leaks prevents the accumulation of dirt and makes the floor easy to clean.

Skyconcrete Indoor® is also compatible with underfloor heating: water-based, it does not release hazardous substances for the health of people and the environment.

Application

1. Grinding of the concrete, screed, self-leveling compound, or tiled surface.
2. Application of Skyprimer, broadcast with quartz sand.
3. Application of Skyconcrete® Indoor using a steel trowel or squeegee.
4. Application of a second coat of Skyconcrete® Indoor, finished with a power trowel, followed by sanding and cleaning.
5. After full curing, application of the appropriate final protective sealer.

The pros of the product

Available both in the polished and glossy version (for interiors) and in the rough, satin, bocciard and non-slip version (perfect for outdoors), Terrazzoverlay allows you to find application in a wide variety of contexts: it is ideal for homes, shops, offices, showrooms, shopping centres, business centres, gyms, sports and recreational centres, residential complexes, public buildings, thermal centres, spas, sites of historical-cultural interest (museums, gathering areas), restaurants, hotels.

Resistant even to heavy traffic, it requires minimal maintenance and is hygienic and easy to clean, because it has a continuous surface, without joints or joints. In addition, it is also possible to make the coordinated skirting board in the same material and colour, for a homogeneous and refined effect in any environment.

Application

1. Grinding of the concrete, screed, or tiled surface.
2. Application of Skyprimer, fully broadcast with quartz sand to refusal.
3. Application of Terrazzoverlay using a screed bar and spiked roller.
4. Grinding, grouting, and polishing.
5. Application of the final protective sealer.

The pros of the product

The colour of the acidified floor changes permanently. Unlike surfaces simply coloured on the surface or made of coloured resin, the acidified floor maintains its valuable appearance over time: it does not discolour, does not wear out and has a high resistance to abrasion.

It is therefore a very effective solution for creating aesthetically unique and practical surfaces, suitable for floors of shops, showrooms, lofts, private homes, restaurants, discos, pubs, public places, shopping centres, hotels, exhibition centres, exhibition halls – and more generally all environments subject to frequent trestrum.

Application

1. Formwork installation and placement of the polyethylene sheet, non-woven fabric (TNT), spacers and welded wire mesh.
2. Placement of concrete modified with Coldpav or Hotpav and reinforced with Plam Fibre Isoplam.
3. Application of Deco Nuvolato Isoplam and finishing using power trowelling machines.
4. Washing of the surface with Plam Apripori, followed by the application of one or more coats of Plam Acid.
5. Final washing of the surface with Neutra Clean Liquid.
6. Application of Plam Densifier using a single-disc floor machine, followed by the application of Metallic Wax.