The pros of the product

Microverlay microcement is a low-thickness architectural cement that is the ideal solution for renovating outdoor spaces without the need to remove or demolish existing surfaces.

The excellent adhesion skills in fact allow the microcement to be applied on any type of material: sand-cement screed, cement, ceramics, marble, stone, tiles and self-levelling.

Resistant to medium traffic, to atmospheric agents and waterproof, Isoplam resin cement can cover floors and vertical surfaces in any outdoor, private and public environment: terraces, porches, pool borders, courtyards, pedestrian paths, dehors, commercial spaces and accommodation facilities; but also stairs, wall coverings and outdoor furniture elements.

The absence of joints or joints makes Microverlay a continuous, hygienic and extremely easy to clean surface, ideal for outdoor contexts and designed to ensure durability over time: the product is water-based and does not release dangerous substances for the health of people and the environment.

Application

FLOOR:

1. Grinding of the concrete, screed, self-levelling compound or tiled surface.
2. Application of Vapor Barrier with fibreglass mesh.
3. Application of Microverlay Base or Microverlay Medium, followed by intermediate sanding and cleaning.
4. Application of Microverlay Finish, followed by intermediate sanding and cleaning.
5. Once fully cured, application of the appropriate final protective sealer.

WALL:

1. PCleaning of the plaster substrate.
2. Application of Deco Primer Finish.
3. Application of Microverlay Medium, followed by sanding and cleaning.
4. Application of Microverlay Finish, followed by sanding and cleaning.
5. Once fully cured, application of the appropriate final protective sealer.

The pros of the product

Available in different surface textures, Terrazzoverlay XL Grip offers smooth finishes for covered or representative outdoor contexts, or non-slip brushed treatments ideal for exposed outdoor environments and high-pass surfaces.

This design flexibility makes it suitable for private homes, outdoor commercial spaces, hotels, restaurants, urban areas, management centres, sports and recreational facilities, residential complexes and public contexts.

Designed to withstand high traffic and variable weather conditions, it ensures smooth surfaces that are easy to maintain and leak-free, improving both technical performance and aesthetic performance.

Application

1. Grinding of the concrete, screed, or tiled surface.
2. Application of Skyprimer, fully broadcast with quartz sand to refusal.
3. Application of Terrazzoverlay XL Grip using a screed bar and spiked roller.
4. Light grinding and grouting.
5. Application of the final protective sealer.

The pros of the product

From a performance point of view, Terrazzoverlay Grip is designed to meet the specific needs of outdoor environments: the non-slip finish ensures safety even in the presence of water, while the continuous surface, free of leaks, facilitates maintenance and improves overall hygiene.

The system offers high resistance to atmospheric agents, UV rays and temperature changes, maintaining colour stability and material integrity over time.

The design versatility, combined with the possibility of customising colours, particle sizes and natural inserts, allows you to create unique and durable surfaces, while optimising intervention times and costs thanks to the low application thickness.

Application

1. Grinding of the concrete, screed, or tiled surface.
2. Application of Skyprimer, fully broadcast with quartz sand to refusal.
3. Application of Terrazzoverlay using a screed bar and spiked roller.
4. Light grinding, grouting, and polishing.
5. Application of the final protective sealer.

The pros of the product

The ease of laying Isoplam washed gravel allows you to create customised and tailor-made floors for each project. With a required thickness of only 3 centimetres, it is possible to create a washed stone surface even on existing floors, thanks to the “cool on hard” technique that ensures excellent adhesion and a homogeneous finish.

Alternatively, Isoplam washed gravel can be applied directly to fresh concrete using the “fresh on cool” technique, ideal for new realisations. Washed stone floors are thus perfect for renovating and decorating squares, sidewalks, avenues, arcades, historic centres and other public places, offering durability, aesthetic value and visual continuity in any urban or residential context.

Application

1. The screed, if not sufficiently rough, must be scarified and washed.
2. Application of Cement Primer bonding primer.
3. Application of ItalianTerrazzo (Deco Ghiaino + Cement + Stone Aggregates) in thicknesses from 2 to 5 cm.
4. Screeding and smoothing of the surface.
5. Application of Iso Deactivator by Isoplam.
6. Washing of the surface within 12–24 hours using a pressure washer, followed by the application of Plam Sealing/L or Plam Sealing Water protective sealer.

The pros of the product

Unlike surface treatments or pigmented resins, the colour of the surface guarantees colour stability over time: it is not afraid of sun exposure, atmospheric agents and abrasion, ensuring high performance even outside.

It is therefore an effective choice for creating outdoor flooring with a strong aesthetic and functional value, ideal for outdoor commercial spaces, residential contexts, dehors, pedestrian paths, public areas, hospitality, executive centres, exhibition areas and all surfaces subject to traffic and climatic stress.

Application

1. Formwork installation and placement of the polyethylene sheet, non-woven fabric (TNT), spacers and welded wire mesh.
2. Placement of concrete modified with Coldpav or Hotpav and reinforced with Plam Fibre Isoplam.
3. Application of Deco Nuvolato Isoplam and finishing using power trowelling machines.
4. Washing of the surface with Plam Apripori, followed by the application of one or more coats of Plam Acid.
5. Final washing of the surface with Neutra Clean Liquid.
6. Application of Plam Densifier using a single-disc floor machine, followed by Metallic Wax.

The pros of the product

Deco Nuvolato Grip combines elegant and refined aesthetics with the best mechanical performance, offering a perfect balance between design and functionality. Made with a special mixture of cement, spheroidal quartz and iron oxides, it guarantees resistance to UV rays, wear and atmospheric agents, keeping its technical and chromatic characteristics unaltered over time.

These properties make Deco Nuvolato Grip the ideal solution for exterior floors subject to strong wear or exposure to climatic agents, such as shopping centres, exhibition pavilions, museums, schools, recreational centres, but also offices, shops and residential contexts. In addition, thanks to the addition of specific sealants and protectors, the coating can become water-repellent, stain-resistant, anti-oil and dust-proof, ensuring maximum durability, easy maintenance and an always impeccable appearance.

Application

1. Formwork installation and placement of the polyethylene sheet, non-woven fabric (TNT), spacers and welded wire mesh.
2. Placement of fibre-reinforced, admixture-modified concrete.
3. Application and power trowelling of DECO NUVOLATO ISOPLAM® until a slip resistance rating of R12 or R13 is achieved.
4. After the concrete has cured, application of the appropriate final protective sealer.

The pros of the product

The low thickness and high performance of adhesion and resistance make Skygrip the ideal solution for the renewal of existing surfaces. Thanks to its resistance to high traffic, chemical and atmospheric agents, abrasion, cracking and frost, this coating allows you to renovate floors and environments in a quick and practical way, without the need for demolition or removal. The result is an efficient intervention, with considerable time and cost savings.

Applicable on ceramic, tiles, marble, cement, sand-cement screed and self-levelling, Skygrip guarantees a perfect adhesion and a continuous and modern aesthetic. In addition, the absence of leaks avoids the accumulation of dirt and makes the floor easy to clean and always impeccable, even in the environments most subject to wear or frequent passage.

Application

1. Preventiva levigatura della superficie in calcestruzzo, massetto, autolivellante o piastrella.
2. Applicazione di Skyprimer spolverato con quarzo.
3. Applicazione di Skygrip con frattazzo o squeegee.
4. Applicazione di Skygrip e lavorazione con frattazzatrice meccanica con disco frattazzo o frattazzi di sgrossatura montati, carteggiatura e pulizia.
5. Dopo la stagionatura, applicazione del protettivo finale idoneo.

The pros of the product

The stamped concrete floor is a monolithic floor, without joints. For this reason, it is easier to clean and has no places where water can infiltrate or where mosses and weeds can grow. It is also necessary to add special protective resins that make the floor unassailable from oils and fats, water-repellent, mould-proof, dustproof.

Easy and quick to apply, Plam Stampable allows a considerable saving of time and labour compared to the realisation of traditional stone or tile flooring. The stone-effect moulded concrete floor is available in different colours and does not require a structural screed or containment cordon: once the subfloor is prepared, it is possible to pour concrete directly.

The low-thickness version, Plam Stampable Overlay, can be used on both new and existing concrete supports, even on tiles. Isoplam’s Plam Stampable Overlay system is perfect for all those contexts, mainly outdoor and medium or high traffic, where aesthetically appreciable and high resistance low-thickness pavements are required: sidewalks, porches, avenues, pool edges, ramps, parking lots.

Application

PLAM STAMPABLE:

1. Installation of formwork, polyethylene sheeting, non-woven geotextile, spacers and welded steel reinforcement mesh.
2. Placement of concrete admixed with Coldpav or Hotpav and reinforced with Plam Fibre Isoplam.
3. Application of Plam Hardening coloured surface hardener in two or three broadcast applications, followed by trowelling to obtain a smooth surface.
4. Application of Plam Rele coloured release agent.
5. Pattern imprinting and finishing using Isoplam stamps, rollers and specialised tools.
6. Cleaning of the surface with an Isoplam pressure washer and single-disc machine, followed by the application of Plam Sealing/L, Plam Sealing/S or Plam Sealing Water protective sealer.

PLAM STAMPABLE OVERLAY:

1. Application of Cement Primer to the existing concrete screed (smooth substrates must be mechanically scarified beforehand).
2. Application of Plam Overlay in natural grey mixed with Plam Hardening coloured surface hardener, at a thickness of 1 to 2.5 cm, followed by smoothing.
3. Application of Plam Rele coloured release agent.
4. Pattern imprinting and finishing using Isoplam specialised tools.
5. Cleaning of the surface with suitable detergents and dedicated Isoplam equipment, followed by the application of Plam Sealing/L protective sealer.

The pros of the product

The spray floor allows you to decorate new or pre-existing concrete floors. With the simple use of floor stencils you can make various types of decorations with a final effect similar to porphyry, stone, granite or marble.

Textures in the shape of bricks arranged with different geometries, irregular stones, pebbles, cobblestones are available. With floor stencils it is also possible to draw medallions such as the wind rose, Greek and rosettes.

The application of a protective resin for decorative concrete stenciling makes the flooring resistant to wear, weathering and washable.

Application

1. On a fully cured screed or tiled surface, application of Skyprimer, broadcast with 0.6–1.2 mm quartz.
2. Application and smoothing of the first coat of Plam Hardening coloured surface hardener mixed with Deco Bind liquid.
3. Placement of the Isoplam paper stencil.
4. Application of the second coat of Plam Hardening coloured surface hardener using the Isoplam Hopper Gun.
5. Removal of the paper stencil before the material has completely dried.
6. Once fully cured, application of the Plam Sealing Water protective sealer.

The pros of the product

The low thickness and excellent adhesion and resistance to high traffic, chemical and atmospheric agents, abrasion, cracking and frost allow Skyconcrete® Outdoor to cover even existing surfaces, renewing the environments in a practical and fast way, without the need to remove or demolish old floors – with considerable savings in time and intervention costs.

Skyconcrete® Outdoor can be applied with excellent results on ceramics, tiles, marble, concrete, sand-cement screeds and self-levelling. The absence of leaks prevents the accumulation of dirt and makes the floor easy to clean and maintain over time.

Application

1. Grinding of the existing concrete, screed, self-levelling floor or tiled surface.
2. Application of Skyprimer, broadcast with quartz.
3. Application of Skyconcrete® Outdoor using a trowel or squeegee.
4. Application of a second coat of Skyconcrete® Outdoor using a trowel or squeegee, followed by sanding and cleaning.
5. Once fully cured, application of a suitable protective sealer.